--- title: "Two-Stage Randomization for Cox Type rate models " author: Klaus Holst & Thomas Scheike date: "`r Sys.Date()`" output: rmarkdown::html_vignette: fig_caption: yes fig_width: 7.15 fig_height: 5.5 vignette: > %\VignetteIndexEntry{Two-Stage Randomization for Competing risks and Survival outcomes} %\VignetteEngine{knitr::rmarkdown} %\VignetteEncoding{UTF-8} --- ```{r, include = FALSE} knitr::opts_chunk$set( collapse = TRUE, comment = "#>" ) library(mets) ``` Two-Stage Randomization for counting process outcomes ======================================================== Specify rate models of $N_1(t)$. - survival data - competing risks, cause specific hazards. - recurrent events data Under simple randomization we can estimate the rate Cox model - \( \lambda_0(t) \exp(A_0 \beta_0) \) Under two-stage randomization we can estimate the rate Cox model - \( \lambda_0(t) \exp(A_0 \beta_0 + A_1(t) \beta_1 ) \) Starting point is that Cox's partial likelihood score can be used for estimating parameters \begin{align*} U(\beta) & = \int (A(t) - e(t)) dN_1(t) \end{align*} where $A(t)$ is the combined treatments over time. - the solution will converge to $\beta^*$ the Struthers-Kalbfleisch solution of the score and will have robust standard errors Lin-Wei. The estimator can be agumented in different ways using additional covariates at the time of randomization and a censoring augmentation. The solved estimating eqution is \begin{align*} \sum_i U_i - AUG_0 - AUG_1 + AUG_C = 0 \end{align*} using the covariates from augmentR0 to augment with \begin{align*} AUG_0 = ( A_0 - \pi_0(X_0) ) X_0 \gamma_0 \end{align*} where possibly $P(A_0=1|X_0)=\pi_0(X_0)$ but does not depend on covariates under randomization, and furhter using the covariates from augmentR1, to augment with R indiciating that the randomization takes place or not, \begin{align*} AUG_1 = R ( A_1 - \pi_1(X_1)) X_1 \gamma_1 \end{align*} and the dynamic censoring augmenting \begin{align*} AUG_C = \int_0^t \gamma_c(s)^T (e(s) - \bar e(s)) \frac{1}{G_c(s) } dM_c(s) \end{align*} where $\gamma_c(s)$ is chosen to minimize the variance given the dynamic covariates specified by augmentC. The propensity score models are always estimated unless it is requested to use some fixed number $\pi_0=1/2$ for example, but always better to be adaptive and estimate $\pi_0$. Also $\gamma_0$ and $\gamma_1$ are estimated to reduce variance of $U_i$. - The treatment's must be given as factors. - Treatment for 2nd randomization may depend on response. - Treatment probabilities are estimated by default and uncertainty from this adjusted for. - treat.model must then typically allow for interaction with treatment number and covariates - Randomization augmentation for 1'st and 2'nd randomization possible. - typesR=c("R0","R1","R01") - Censoring model possibly stratified on observed covariates (at time 0). - default model is to stratify after randomization R0 - cens.model can be specified - Censoring augmentation done dynamically over time with time-dependent covariates. - typesC=c("C","dynC"), C fixed coefficients and dynC dynamic - done for each strata in censoring model Standard errors are estimated using the influence function of all estimators and tests of differences can therefore be computed subsequently. - variance adjustment for censoring augmentation computed subtracting variance gain - influence functions given for case with R0 only The times of randomization is specified by - treat.var is "1" when a randomization is given - default is to assume that all time-points corresponds to a treatment, the survival case without time-dependent covariates - recurrent events situation must be specified as first record of each subject, see below example. Data must be given on start,stop,status survival format with - one code of status indicating events of interest - one code for the censorings The phreg_rct can be used for counting process style data, and thus covers situations with - recurrent events - survival data - cause-specific hazards (competing risks) and will in all cases compute augmentations - dynamic censoring augmentation - dynC - RCT augmentation - R0, R1 and R01 Simple Randomization: Lu-Tsiatis marginal Cox model =================================================== ```{r} library(mets) set.seed(100) ## Lu, Tsiatis simulation data <- mets:::simLT(0.7,100) dfactor(data) <- Z.f~Z out <- phreg_rct(Surv(time,status)~Z.f,data=data,augmentR0=~X,augmentC=~factor(Z):X) summary(out) ###out <- phreg_rct(Surv(time,status)~Z.f,data=data,augmentR0=~X,augmentC=~X) ###out <- phreg_rct(Surv(time,status)~Z.f,data=data,augmentR0=~X,augmentC=~factor(Z):X,cens.model=~+1) ``` Results consitent with speff of library(speff2trial) ```{r} ###library(speff2trial) library(mets) data(ACTG175) ### data <- ACTG175[ACTG175$arms==0 | ACTG175$arms==1, ] data <- na.omit(data[,c("days","cens","arms","strat","cd40","cd80","age")]) data$days <- data$days+runif(nrow(data))*0.01 dfactor(data) <- arms.f~arms notrun <- 1 if (notrun==0) { fit1 <- speffSurv(Surv(days,cens)~cd40+cd80+age,data=data,trt.id="arms",fixed=TRUE) summary(fit1) } # # Treatment effect # Log HR SE LowerCI UpperCI p # Prop Haz -0.70375 0.12352 -0.94584 -0.46165 1.2162e-08 # Speff -0.72430 0.12051 -0.96050 -0.48810 1.8533e-09 out <- phreg_rct(Surv(days,cens)~arms.f,data=data,augmentR0=~cd40+cd80+age,augmentC=~cd40+cd80+age) summary(out) ``` The study is actually block-randomized according (?) so the standard should be computed with an adjustment that is equivalent to augmenting with this block as factor ```{r} dtable(data,~strat+arms) dfactor(data) <- strat.f~strat out <- phreg_rct(Surv(days,cens)~arms.f,data=data,augmentR0=~strat.f) summary(out) ``` Two-Stage Randomization CALGB-9823 for survival outcomes ========================================================= We here illustrate some analysis of one SMART conducted by Cancer and Leukemia Group B Protocol 8923 (CALGB 8923), Stone and others (2001). 388 patients were randomized to an initial treatment of GM-CSF (A1 ) or standard chemotherapy (A2 ). Patients with complete remission and informed consent to second stage were then re-randomized to only cytarabine (B1 ) or cytarabine plus mitoxantrone (B2 ). We first compute the weighted risk-set estimator based on estimated weights \begin{align*} \Lambda_{A1,B1}(t) & = \sum_i \int_0^t \frac{w_i(s)}{Y^w(s)} dN_i(s) \end{align*} where $w_i(s) = I(A0_i=A1) + (t>T_R) I(A1_i=B1)/\pi_1(X_i)$, that is 1 when you start on treatment $A1$ and then for those that changes to $B1$ at time $T_R$ then is scaled up with the proportion doing this. This is equivalent to the IPTW (inverse probability of treatment weighted estimator). We estimate the treatment regimes $A1, B1$ and $A2, B1$ by letting $A10$ indicate those that are consistent with ending on $B1$. $A10$ then starts being $1$ and becomes $0$ if the subject is treated with $B2$, but stays $1$ if the subject is treated with $B1$. We can then look at the two strata where $A0=0,A10=1$ and $A0=1,A10=1$. Similary, for those that end being consistent with $B2$. Thus defining $A11$ to start being $1$, then stays $1$ if $B2$ is taken, and becomes $0$ if the second randomization is $B1$. - the treatment models are for all time-points, unless the weight.var variable is given (1 for treatments, 0 otherwise) to accomodate a general start,stop format - the treatment model may also depend on a response value - standard errors are based on influence functions and is also computed for the baseline We here use the propensity score model $P(A1=B1|A0)$ that uses the observed frequencies on arm $B1$ among those starting out on either $A1$ or $A2$. ```{r} data(calgb8923) calgt <- calgb8923 tm=At.f~factor(Count2)+age+sex+wbc tm=At.f~factor(Count2) tm=At.f~factor(Count2)*A0.f head(calgt) ll0 <- phreg_IPTW(Event(start,time,status==1)~strata(A0,A10)+cluster(id),calgt,treat.model=tm) pll0 <- predict(ll0,expand.grid(A0=0:1,A10=0,id=1)) ll1 <- phreg_IPTW(Event(start,time,status==1)~strata(A0,A11)+cluster(id),calgt,treat.model=tm) pll1 <- predict(ll1,expand.grid(A0=0:1,A11=1,id=1)) plot(pll0,se=1,lwd=2,col=1:2,lty=1,xlab="time (months)",xlim=c(0,30)) plot(pll1,add=TRUE,col=3:4,se=1,lwd=2,lty=1,xlim=c(0,30)) abline(h=0.25) legend("topright",c("A1B1","A2B1","A1B2","A2B2"),col=c(1,2,3,4),lty=1) summary(pll1,times=1:10) summary(pll0,times=1:10) ``` The propensity score mode can be extended to use covariates to get increased efficiency. Note also that the propensity scores for $A0$ will cancel out in the different strata. We now illustrate how to fit a Cox model of the form \begin{align*} & \lambda_{A0}(t) \exp( B1(t) \beta_1 + B2(t) \beta_2) \end{align*} where $\beta_0$ is the effect of treatment $A2$ and the effect of $B1$ Now comparing only those starting on A1/A2 to compare the effect of B1 versus B2 ```{r} library(mets) data(calgb8923) calgt <- calgb8923 calgt$treatvar <- 1 ## making time-dependent indicators of going to B1/B2 calgt$A10t <- calgt$A11t <- 0 calgt <- dtransform(calgt,A10t=1,A1==0 & Count2==1) calgt <- dtransform(calgt,A11t=1,A1==1 & Count2==1) calgt0 <- subset(calgt,A0==0) ss0 <- phreg_rct(Event(start,time,status)~A10t+A11t+cluster(id),data=subset(calgt,A0==0), typesR=c("non","R1"),typesC=c("non","dynC"), treat.var="treatvar",treat.model=At.f~factor(Count2), augmentR1=~age+wbc+sex+TR,augmentC=~age+wbc+sex+TR+Count2) summary(ss0) ss1 <- phreg_rct(Event(start,time,status)~A10t+A11t+cluster(id),data=subset(calgt,A0==1), typesR=c("non","R1"),typesC=c("non","dynC"), treat.var="treatvar",treat.model=At.f~factor(Count2), augmentR1=~age+wbc+sex+TR,augmentC=~age+wbc+sex+TR+Count2) summary(ss1) ``` and a more structured model with both A0 and A1, that does not seem very reasonable based on the above, ```{r} ssf <- phreg_rct(Event(start,time,status)~A0.f+A10t+A11t+cluster(id), data=calgt, typesR=c("non","R0","R1","R01"),typesC=c("non","C","dynC"), treat.var="treatvar",treat.model=At.f~factor(Count2), augmentR0=~age+wbc+sex,augmentR1=~age+wbc+sex+TR,augmentC=~age+wbc+sex+TR+Count2) ``` Recurrent events: Simple Randomization ====================================== Recurrents events simulation with death and censoring. ```{r} n <- 1000 beta <- 0.15; data(base1cumhaz) data(base4cumhaz) data(drcumhaz) dr <- scalecumhaz(drcumhaz,1) base1 <- scalecumhaz(base1cumhaz,1) base4 <- scalecumhaz(base4cumhaz,0.5) cens <- rbind(c(0,0),c(2000,0.5),c(5110,3)) ce <- 3; betao1 <- 0 varz <- 1; dep=4; X <- z <- rgamma(n,1/varz)*varz Z0 <- NULL px <- 0.5 if (betao1!=0) px <- lava::expit(betao1*X) A0 <- rbinom(n,1,px) r1 <- exp(A0*beta[1]) rd <- exp( A0 * 0.15) rc <- exp( A0 * 0 ) ### rr <- mets:::simLUCox(n,base1,death.cumhaz=dr,r1=r1,Z0=X,dependence=dep,var.z=varz,cens=ce/5000) rr$A0 <- A0[rr$id] rr$z1 <- attr(rr,"z")[rr$id] rr$lz1 <- log(rr$z1) rr$X <- rr$lz1 rr$lX <- rr$z1 rr$statusD <- rr$status rr <- dtransform(rr,statusD=2,death==1) rr <- count.history(rr) rr$Z <- rr$A0 data <- rr data$Z.f <- as.factor(data$Z) data$treattime <- 0 data <- dtransform(data,treattime=1,lbnr__id==1) dlist(data,start+stop+statusD+A0+z1+treattime+Count1~id|id %in% c(4,5)) ``` Now we fit the model ```{r} fit2 <- phreg_rct(Event(start,stop,statusD)~Z.f+cluster(id),data=data, treat.var="treattime",typesR=c("non","R0"),typesC=c("non","C","dynC"), augmentR0=~z1,augmentC=~z1+Count1) summary(fit2) ``` - Censoring model was stratified on Z.f - treatment probabilities were estimated using the data Twostage Randomization: Recurrent events ========================================= ```{r} n <- 500 beta=c(0.3,0.3);betatr=0.3;betac=0;betao=0;betao1=0;ce=3;fixed=1;sim=1;dep=4;varz=1;ztr=0; ce <- 3 ## take possible frailty Z0 <- rgamma(n,1/varz)*varz px0 <- 0.5; if (betao!=0) px0 <- expit(betao*Z0) A0 <- rbinom(n,1,px0) r1 <- exp(A0*beta[1]) # px1 <- 0.5; if (betao1!=0) px1 <- expit(betao1*Z0) A1 <- rbinom(n,1,px1) r2 <- exp(A1*beta[2]) rtr <- exp(A0*betatr[1]) rr <- mets:::simLUCox(n,base1,death.cumhaz=dr,cumhaz2=base1,rtr=rtr,betatr=0.3,A0=A0,Z0=Z0, r1=r1,r2=r2,dependence=dep,var.z=varz,cens=ce/5000,ztr=ztr) rr$z1 <- attr(rr,"z")[rr$id] rr$A1 <- A1[rr$id] rr$A0 <- A0[rr$id] rr$lz1 <- log(rr$z1) rr <- count.history(rr) rr$A1t <- 0 rr <- dtransform(rr,A1t=A1,Count2==1) rr$At.f <- rr$A0 rr$A0.f <- factor(rr$A0) rr$A1.f <- factor(rr$A1) rr <- dtransform(rr, At.f = A1, Count2 == 1) rr$At.f <- factor(rr$At.f) dfactor(rr) <- A0.f~A0 rr$treattime <- 0 rr <- dtransform(rr,treattime=1,lbnr__id==1) rr$lagCount2 <- dlag(rr$Count2) rr <- dtransform(rr,treattime=1,Count2==1 & (Count2!=lagCount2)) dlist(rr,start+stop+statusD+A0+A1+A1t+At.f+Count2+z1+treattime+Count1~id|id %in% c(5,10)) ``` Now fitting the model and computing different augmentations (true values 0.3 and 0.3) ```{r} sse <- phreg_rct(Event(start,time,statusD)~A0.f+A1t+cluster(id),data=rr, typesR=c("non","R0","R1","R01"),typesC=c("non","C","dynC"),treat.var="treattime", treat.model=At.f~factor(Count2), augmentR0=~z1,augmentR1=~z1,augmentC=~z1+Count1+A1t) summary(sse) ``` - treat.model has A0 and A1 coded as At.f and we here allow a model that depends on the randomization to be as adaptive as possible. - for the observational case one can here also adjust for covarites. - Censoring model was stratified on A0.f Causal assumptions for Twostage Randomization: Recurrent events =============================================================== We take interest in $N_1$ but also have death $N_d$. Now we need that given $X_0$ - \( A_0 \perp N_1^0(), N_1^1(), N_d^0(), N_d^1() | X_0 \) - positivity \( 1 > \pi_0(X_0) > 0 \) and given $\bar X_1$ the history accumulated at time $T_R$ of 2nd randomization - \( A_1 \perp N_1^0(), N_1^1(), N_d^0(), N_d^1() | \bar X_1 \) - positivity \( 1 > \pi_1(X_1) > 0 \) and - consistency to link the counterfactual quantities to observed data. We must use IPTW weighted Cox score and augment as before In addition we need that the censoring is independent given for example $A_0$ - Independent censoring To use the phreg_rct in this situation - RCT=FALSE - propensity score models must be specified - marginal estimate is based on IPTW cox model phreg_IPTW - when the same model is used for the propensity scores and the augmentation models the augmentation models are not needed due to the adaptive nature from fitting the propensity score models. ```{r} fit2 <- phreg_rct(Event(start,stop,statusD)~Z.f+cluster(id),data=data, typesR=c("non","R0"),typesC=c("non","C","dynC"), RCT=FALSE,treat.model=Z.f~z1,augmentR0=~z1,augmentC=~z1+Count1, treat.var="treattime") summary(fit2) ``` and for twostage randomization ```{r} sse <- phreg_rct(Event(start,time,statusD)~A0.f+A1t+cluster(id),data=rr, typesR=c("non","R0","R1","R01"),typesC=c("non","C","dynC"), treat.var="treattime", RCT=FALSE,treat.model=At.f~z1*factor(Count2), augmentR0=~z1,augmentR1=~z1,augmentC=~z1+Count1+A1t) summary(sse) ``` SessionInfo ============ ```{r} sessionInfo() ```